入口焊材优质供应商
焊接质料专业生产厂家
Category种别Trade-Mark牌号Equivalent to China Standard相当国标Characteristics & application特征和用途Equivalent to AWS相当AWSHard-surfacing硬面堆焊D 667EDZCr-B-15HRc≥48. Resistance to wear, gas corrosion and oxidation. Hardfacing of blast furnace hopper and cracker part.HRc≥48，耐磨、耐气蚀、抗氧化。堆焊高炉料钟、破碎机件D 802EDCoCr-A-03HRc38-47. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as the edge of thermo-cutter.HRc38-47，耐热、耐蚀、耐磨。堆焊高温工件如热剪切刀刃ECoCr-AD 812EDCoCr-B-03HRc45-50. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as internal-combustion engine valve.HRc45-50，耐热、耐蚀、耐磨。堆焊高温工件如内燃机阀ECoCr-BD 822HRc≥53. Resistance to Wear and heat, bad shock resistance. Hardfacing of rotating blade wheel of boiler.HRc≥53，耐热、耐磨，但抗攻击性差。堆焊锅炉旋转叶轮D 832EDCoCr-C-03HRc≥50. Wear and heat resistance. Hardfacing of high temperature part such as hot-rolling guided way.HRc≥50，耐热、耐磨。堆焊高温工件如热轧导轨ECoCr-CD 842EDCoCr-D-03HRc28-38. Corrosion and thermo-fatigue resistance, work harding. Hardfacing of hot forging die.HRc28-38，耐蚀、抗热疲劳，具有加工硬化性。堆焊热锻模Cast iron铸铁Z 308EZNiPure nickel, excellent general properties. Used to weld thin cast iron part and repair welding machined surface, such as guided way of machine tool.纯镍，综合性能好。铸铁薄件及加工面补焊用，如机床导卫ENi-ClZ 408EZNiFeIron nickel, high strength and excellent ductility. Repair welding of important gray cast iron and nodular cast iron, such as cylinder cap.镍铁，强度高、塑性好。主要灰铸铁及球铁焊补用，如汽缸盖ENiFe-ClZ 508EZNiCu-1Copper nickel, good machinability and bad crack resistance. Repair welding of sand hole and gray cast iron machined surface subject to no load.镍铜，易加工，但抗裂性较差。不受力的灰铸铁加工面及砂眼补焊ENiCu-BCopper alloys铜合金Cu 107ECuRed copper, atmosphere and sea water corrosion and excellent electric conductivity. Welding of red copper such as electrical copper row.紫铜，耐大气，海水侵蚀，导电性好。紫铜焊接用，如导电铜排ECuCu 207ECuSiSilicon bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.硅青铜，耐蚀、强度高。铜、硅青铜及黄铜焊接用ECuSiCu 227ECuSnBTin phosphor bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.锡磷青铜，耐蚀、强度高。铜、硅青铜及黄铜焊接用ECuSn-CCu 237ECuAlAluminum bronze, wear and corrosion and high strength. Welding or surfacing of copper alloys.铝青铜，耐磨、耐蚀，强度高。铜合金焊接或堆焊用ECuAl-A2Aluminum alloys铝合金Al 109TAlPure aluminum, excellent corrosion resistance and middle strength. Welding of pure aluminum.纯铝，耐蚀性好，但强度不高，纯铝焊接用E1100Al 209TAlSiSilicon aluminum, good crack resistance and wide range of usage. Welding of aluminum alloys other than aluminum magnesium alloys.铝硅，抗裂性好，通用性大。铝合金焊接用，不宜焊接铝镁合金E4043Al 309TAMnManganese aluminum, corrosion resistance and high strength. Welding of aluminum alloys.铝锰，强度高，耐蚀。铝合金焊接用E3003Nickel alloys镍合金Ni 102ENi-1Pure nickel. Welding and surfacing of nickel and nickel to steel.纯镍，用于镍、镍与钢的焊接与堆焊ENi-1Ni 207ENiCu-7Copper nickel. Welding and surfacing of copper nickel and copper nickel to steel.镍铜，用于镍铜、镍铜与钢的焊接与堆焊ENiCu-7Category种别Trademark牌号Chemical composition主要成份(%)Characteristics & application特征和用途Equivalent to AWS相当AWSHardfacing硬面堆焊S 101C3 Cr28 Ni4Si3.5 Fe Rem.HRc48-54. Resistance to wear, gas corrosion and oxidation. Hardfacing of bucket tooth and case pump.HRc48-54，耐磨、耐气蚀、抗氧化。堆焊铲斗齿，泵套S 111C1 Cr29 W5Co Rem.HRc38-47. Resistance to wear and corrosion at high-temperature. Hardfacing of high temperature and pressure valve.HRc38-47，高温下耐磨、耐蚀。堆焊高温高压阀门ECoCr-AS 112C1.5 Cr29 W8Co Rem.HRc45-50. Resistance to wear and corrosion at high-temperature. Hardfacing of valve and hot-rolling pass.HRc45-50，高温下耐磨、耐蚀。堆焊阀门，热轧孔型ECoCr-BS 113C2.5 Cr30 W17Co Rem.HRc≥55. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of screw charging carriage.HRc≥55，高温下耐磨、耐热，但抗攻击性差。堆焊螺旋送料机用S 114C2.5 Cr30 W12Co Rem.HRc≥53. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of three-cone bit.HRc≥53，高温下耐磨、耐热，但抗攻击较差。堆焊牙轮钻头ECoCr-CCopperalloys铜合金S 201Sn1 Si0.3Mn0.3Cu Rem.Good mechanical properties and crack resistance. Gas welding and argon arc welding of red copper.机械性能好，抗裂性好。紫铜气焊及氩弧焊用ERCuS 211Si3 Mn1Cu Rem.Good mechanical properties. Argon arc welding of copper alloys and MIG brazing of steel.机械性能好，铜合金氩弧焊及钢的MIG钎焊用ERCuSi-AlS 212Sn5 Cu Rem.Wear resistance. Argon arc welding of copper alloys and surfacing of steel.耐磨性好。铜合金氩弧焊及钢的堆焊用ERCuSn-AS 213Sn8 Cu Rem.Wear resistance. Argon arc welding of copper alloys and surfacing of steel.耐磨性好。铜合金氩弧焊及钢的堆焊用ERCuSn-CS 214Al7.5 Cu Rem.Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.耐磨、耐蚀。铜合金氩弧焊及钢的堆焊用ERCuAl-A1S 215Al9 Cu Rem.Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.耐磨、耐蚀。铜合金氩弧焊及钢的堆焊用ERCuAl-A2S 221Cu60 Sn1 Si0.3Zn Rem.Melting point is about 890℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.熔点约890℃。黄铜气焊及碳弧焊用，也可钎焊铜、钢、铸铁S 221FCu60 Sn1 Si 0.3Zn Rem.S221 welding rod coated with flux.外涂焊剂的S221焊丝S 222Cu58Sn0.9Si0.1Fe0.8 Zn Rem.Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.熔点约880℃。黄铜气焊及碳弧焊用，也可钎焊铜、钢、铸铁RBCuZn-CS 222FCu58Sn0.9Si0.1Fe0.8 Zn Rem.S222 welding rod coated with flux.外涂焊剂的S222焊丝RBCuZn-CS 223Cu59 Sn0.6Zn Rem.Melting point is about 900℃. Braze welding of copper, steel and cast iron.熔点约900℃。铜、钢、铸铁钎焊用RBCuZn-AS 224Cu62 Si0.5Zn Rem.Melting point is about 905℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.熔点约905℃。黄铜气焊及碳弧焊用，也可钎焊铜、钢、铸铁Copperalloys铜合金S 225Cu48 Ni10Zn Rem.Melting point is about 935℃and high strength. Braze welding of steel, nickel and carbide alloys.熔点约935℃。高强度,钎焊钢、镍及硬质合金用RBCuZn-DS 225FCu48 Ni10Zn Rem.S225 welding rod coated with flux.外涂焊剂的S225焊丝RBCuZn-DS 226Cu60 Sn0.3Si0.2 Zn Rem.Melting point is about 900℃. Gas welding of brass, also braze welding of copper, steel and cast iron.熔点约900℃。黄铜气焊用，也可钎焊铜、钢、铸铁S 227Cu58Sn0.9Ni0.5Si0.1 Fe0.8Zn Rem.Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.熔点880℃。黄铜气焊及碳弧焊用，也可钎焊铜、钢、铸铁RBCuZn-BS 229Cu55 Ni6 Mn4Zn余Melting point is about 920℃, high strength. Braze welding of steel, nickel and hard carbide.熔点约920℃。高强度,钎焊钢、镍及硬质合金用Aluminum alloys铝合金S 301Al≥99.5Good ductility and corrosion resistance. Gas welding and argon arc welding of pure aluminum.塑性好、耐蚀。纯铝气焊、氩弧焊用ER1100S 311Si5 Al Rem.Corrosion resistance, wide range of usage. Gas welding and argon arc welding of aluminum alloys other than high magnesium alloys.抗裂性好，通用性大。铝合金气焊、氩弧焊用。不宜用高镁合金ER4043S 321Mn1.3 Al Rem.Good corrosion resistance, weldability and ductility. Gas welding and argon arc welding of aluminum alloys.优异的耐蚀性、可焊性及塑性。铝合金气焊、氩弧焊用S 331Mg5 Mn0.4Al Rem.Corrosion resistance and high strength. Argon arc welding of aluminum alloys.耐蚀，强度高。铝合金氩弧焊用ER5183斯米克钎焊料划分有：（铜锌钎焊料），（铜磷银基钎焊料），（铝基钎焊料），（锡铅钎焊料），（镍基钎焊料).简介如下：Category种别Trade-mark牌号Specification规格MeltingPoint熔点(℃)Chemicalcomposition主要成份(%)Application用途Equivalentto AWS相当AWSCopperzinc铜锌L103Wire & rod丝885-888Cu54 Zn Rem.Brazing of copper, bronze and steel, subjected to low load.钎焊铜、青铜和钢等受力不大工件L104Foil箔890-930Cu57 Mn2Co2 Zn Rem.Brazing of carbide cutting tool.钎焊硬质合金刀具Copperphosphorus铜磷L201Cast rod, wire & rod, powder铸条、丝、粉710-800P7 Cu Rem.Brazing of copper and copper alloys.钎焊铜及铜合金BCuP-2L204Cast rod, wire铸条、丝640-815P5 Ag15Cu Rem.Brazing of copper, copper alloys, silver and molybdenum etc.钎焊铜及铜合金、银、钼等金属。BCuP-5L205Cast rod, wire & rod, powder铸条、丝、箔640-800P6 Ag5Cu Rem.Brazing of copper and copper alloys.钎焊铜及铜合金BCuP-3L207Cast rod, wire & rod铸条、丝640-770P7 Ag5Cu Rem.Brazing of copper and copper alloys.钎焊铜及铜合金BCuP-7L209Cast rod, wire铸条、丝684-710P7 Ag2Cu Rem.Brazing of copper and copper alloys.钎焊铜及铜合金。BCuP-6 Silverbase银基L302Wire & rod丝745-775Ag25 Cu40Zn Rem.Brazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜合金、钢及不锈钢等L303Wire & rod丝660-725Ag45 Cu30Zn余Brazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜合金、钢及不锈钢等BAg-5L303FFlux coated rod涂药丝660-725Ag45 Cu30Zn Rem.L303 coated with flux, the same application as L303.外涂钎剂的L303，用途与L303相同BAg-5L304Foil箔690-775Ag50 Cu34Zn Rem.Brazing of copper, copper alloys and steel etc.钎焊铜及铜合金、钢等BAg-6L308Wire & rod丝779-780Ag72 Cu Rem.Brazing of copper and nickel under vacuum or reducing protective atmosphere.铜和镍的真空或还原掩护气氛钎焊BAg-8L312Wire & rod丝595-605Ag40.Cu.Zn.CdBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜合金、钢及不锈钢等L313Wire & rod丝625-635Ag50.Cu.Zn.CdBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜合金、钢及不锈钢等BAg-1aL321Wire & rod丝615-650Ag56.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜合金、钢及不锈钢等BAg-7L323Wire & rod丝665-755Ag30.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜合金、钢及不锈钢等L325Wire & rod丝645-685Ag45.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜合金、钢及不锈钢等BAg-36L326Wire & rod丝650-720Ag38.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜合金、钢及不锈钢等BAg-34Aluminum base铝基L400Cast rod, wire & rod铸条、丝577-582Si11.5Al Rem.Brazing of aluminum and aluminum alloys.铝及铝合金的钎焊BAlSi-4L401Cast rod铸条525-535Si5 Cu28Al Rem.Brazing of aluminum and aluminum alloys.铝及铝合金的钎焊Tin lead锡铅L600Wire & rod丝183-185Sn60 Sb≤0.8Pb Rem.Soldering of fusible metals and heat-treated part.易熔金属及热处置赏罚件的钎焊60SnL601Wire & rod丝183-227Sn18 Sb2Pb Rem.Soldering of copper, copper alloys and galvanized iron plain sheet.铜及铜合金、镀锌铁皮的钎焊。18SnL602Wire & rod丝183-256Sn30 Sb2Pb Rem.Soldering of copper, brass, copper alloys and galvanized iron plain sheet.铜、黄铜、铁、镀锌铁皮的钎焊30SnL603Wire & rod丝183-235Sn40 Sb2Pb Rem.Soldering of copper, copper alloys, steel and zinc parts.铜及铜合金、钢、锌制零件的钎焊40SnL604Wire & rod丝183-222Sn90 Sb≤0.15Pb Rem.Soldering of copper and steel for food and medicine field.食物、医疗所需铜、钢等金属的钎焊90SnL605Wire & rod丝232-240Ag5 Sn95Soldering of copper and steel for electrical and food field.电器、食物所需铜、钢等金属的钎焊L608Wire & rod丝295-305Sn5.5 Ag2.5Pb Rem.Soldering of copper, copper alloys, steel and stainless steel.铜及铜合金、钢及不锈钢的钎焊Nickel base镍基L702Powder粉970-1000Cr7 B3 Si4Ni Rem.Brazing of stainless steel under vacuum or protective atmosphere.不锈钢真空或掩护气氛钎焊BNi-2Category种别Trade-mark牌号Product name名称Characteristics & application特征和用途Gaswelding气焊CJ301Copper gas welding flux铜气焊熔剂Melting point is about 650℃, flux for gas welding and brazing of copper and copper alloys.熔点约650℃，铜及铜合金气焊或钎焊的助熔剂CJ401Aluminum gas welding flux铝气焊熔剂Melting point is about 560℃, flux for gas welding of aluminum and aluminum alloys.熔点约560℃，铝及铝合金气焊的助熔剂Silverbrazing银钎焊QJ101Silver brazing flux银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless steel within 550-750℃.在550-750℃规模钎焊铜及铜合金、钢及不锈钢的助熔剂QJ102Silver brazing flux银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃.在600-850℃规模钎焊铜及铜合金、钢及不锈钢的助熔剂QJ102ASilver brazing flux银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃. Non agglomeration.在600-850℃规模钎焊铜及铜合金、钢及不锈钢。不易结块QJ112Silver brazing paste flux膏状银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃.在600-850℃规模钎焊铜及铜合金、钢及不锈钢的助熔剂QJ103Silver brazing flux银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless steel within 550-750℃.在550-750℃规模钎焊铜及铜合金、钢及不锈钢的助熔剂Aluminum brazing铝钎焊QJ201Aluminum brazing flux铝钎焊熔剂Brazing flux of aluminum and aluminum alloys within 450-620℃.在450-620℃规模钎焊铝及铝合金的助熔剂QJ207Aluminum brazing flux铝钎焊熔剂Brazing flux of aluminum and aluminum alloys within 560-620℃.在560-620℃规模钎焊铝及铝合金的助熔剂Category种别Trade-mark牌号Chemicalcomposition化学成份(%)Hardness硬度Application用途 Oxy-AcetyleneFlamespray-using氧乙炔焰喷焊F103Cr10 B1.5 Si3 Ni Rem.HRc 25Spray-fusing of cast iron parts,,, such as die for glass, cylinder, and guide.铸铁件的喷焊，如玻璃模具，汽缸、导轨F101Cr10 B2.5 Si3 Ni Rem.HRc 45Spray-fusing of parts resistance to wear and corrosion, such as valve, the rotator and piston of pump.耐磨、耐蚀件的喷焊，如阀门、泵转子、泵柱塞F101FeCr10 B2.5 Si3 Fe10Ni Rem.HRc 45Spray-fusing of corrosion-resistant parts, such as axle and stigma.耐磨件的喷焊，如轴类、汽门F102Cr16 B4 Si4 Ni Rem.HRc 60Spray-fusing of parts resistance to wear, corrosion and high temperature oxidation, such as die and piston.耐磨、耐蚀、抗高温氧化工件的喷焊，如模具、柱塞F102FeCr16 B4 Si4 Fe15Ni Rem.HRc 60Spray-fusing of corrosion-resistant parts, such as axle and cold die.耐磨件的喷焊，如轴类、冷模具F105F102+50%WCHRc 60Spray-fusing of parts resistance to grain-wear , such as guide plate, scraper and blade of fan.抗磨粒磨损chang合的喷焊，如导板、刮板、风机叶片F105FeF102Fe+35%WCHRc 60Spray-fusing of parts resistance to grain-wear, such as guide plate, scraper and blade of fan.抗磨粒磨损chang合的喷焊，如导板、刮板、风机叶片F108F102+80%WCHRc 60Spray-fusing of parts resistance to strong grain-wear and free machining, such as harrow teeth of dredger.抗强烈磨粒磨损，无需加工chang合的喷焊，如挖泥船耙齿F301Cr5 B4 Si4 Ni30Fe Rem.HRc 45Spray-fusing of vulnerable parts of agricultural machinery and mining machinery, such as gear and axletree.农机,矿山机械易损件的喷焊，如齿轮，车轴Track iron powder轨铁粉Cr5 B1.5 Si3 Ni30Fe Rem.HRc 28Repair spray-fusing of defects such as scratch and concavity of railroad track.铁路钢轨擦伤、低塌等缺陷的修复喷焊Oxy-acetylene flame spraying氧乙炔焰喷涂F111Cr5 B1.5 Si3 Ni30Fe Rem.HB 150Spraying of bearing and cutting parts etc.轴承、切削件等的喷涂F113Cr10 B1.5 Si3 Ni Rem.HB 250Spray-fusing or spraying, such as roll, piston and axle of wear and corrosion resistance.喷涂亦可喷焊，如滚筒、柱塞、耐蚀耐磨轴等F313Cr15 B1.5 Fe Rem.HB 250Spraying of dryer of papermaking and axle.造纸烘缸、轴类的喷涂F314Cr18 Ni9 B1.5 Fe Rem.HB 250Spraying of axle.轴类喷涂F412Sn10 P0.3 Cu Rem.HB 80Spraying of axle and bearing.轴、轴承的喷涂F512复合Al5Ni95Backing spray of transition layer between base and working layer.喷涂层的基体与事情层之间过渡（打底）层用喷涂PTAhardfacing等离子弧喷焊F221Cr26 W5 B0.7 Co Rem.HRc 43PTA hardfacing of sealing surface of high temperature and high pressure valve and the edge of hot shearing tool.高温高压阀门密封面、热剪切刃口的等离子喷焊F223Cr21 W5 B1.5 Co Rem.HRc 40PTA hardfacing of parts resistance to wear and corrosion at high temperature, such as valve under high temperature and high pressure, and blower.高温下耐磨耐蚀件的喷焊，如高温高压阀门、鼓风机F321Cr13 B1.5 Si1 Fe Rem.HRc 45PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as stop-plate etc.中温中压阀门的闸板及其他耐磨件的等离子喷焊F322Cr23 Ni13 Si5 B1Fe Rem.HRc 40PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as valve base etc.中温中压阀门的阀座及其他耐磨件的等离子喷焊F422Sn10 P0.3 Cu Rem.HB 80PTA hardfacing of axle and bearing etc.轴、轴承等离子喷焊
苏公安网备 32050602010177号
由D-coding云平台驱动
后台登录入口
使用条款
